- 1.SGPV can make full use of all types of buildings’ surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It’s very low maintenance costs.
- 2.SGPV can be used as a separate grid tie system and can be setup as a large solar array with many of them. The quantity of SGPV in the array is just according to your desire.When you want to increase more solar panels, and if the total power of the solar panels exceeds the allocation grid inverter, it is necessary to increase the cost of a grid inverter.
- 3.Combination of SGPV does not interact -If the performance of a piece of solar panels in the system degrades, this just effects this piece itself, will not affect other SGPV in the system.
- 4.Improving the efficiency of the entire solar power system .every inverter of SGPV has MPPT function, so every panel is working at the maximum power, this will increase the efficiency of the entire system.
- 5.Low power consumption .Most of the parts in the small grid-tie inverter are digital ICs and low power MCU, so the power consumption of it is low, though the quantity of grid tie inverters is increased, but this will not increase the power consumption of the entire system.
GTSUN 2000W Solar Grid Tie Power Inverter Converter For Solar Panel System , DC45V – 90V
Normal AC Output Power:1800W
Maximum AC Output Power :2000W
AC Output Voltage Range (Optional):90V-140V/190V~260V
AC Output Frequency Range:46Hz~65Hz
Total Harmonic Distortion (THD): below5%
DC Input Voltage Range :45V~90V
Peak Inverter Efficiency:92%
Standby Power Consumption:1.5W
Output Current Wave Form:Pure Sine-Wave
Over Current Protection:Yes
Over Temperature Protection:Yes
Reverse Polarity Protection:Yes
Operating Temperature Range:-10 ~ +45
LCD display Function:
On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric energy that combined to the grid.
1. Electric parameters measurement function (voltage, current and active power, electric energy).
2. Running time function (record load cumulative working hours).
3. Backlight function.
4. Power down data save function (save the number of kWh, operation time).
5. Large screen LCD display (display voltage, current, power, active power, cumulative running time)
UP: Short press will display power, electricity, current and voltage in anti-sequence.
DOWN: Short press will display power, electricity, current and voltage in sequence.
BACK LIGHT: Short press will open or close backlight.
…. Read More ….
Buy with confidence from Amazon