- Two Input voltage optional: DC 10-32V to 10-46V [wide input voltage application ] or DC 8-16V to 8-46V [3 strings of lithium battery and 12V battery application], select the input voltage by adjusting the jumper on the back of the PCB.
- Ultra-dense reinforced aluminum radiator allows lower and more stable working temperature, PCB hollow design will reduce possibility of unstable working caused by high temperature.
- Has high-frequency low-impedance capacitor of 2x 470uF/35V(input)and 2x 330uF/50V(output).
- Has a green LED indicator which will light when converter works;with 4 M3 screw holes, convenient to install.
- Simple wiring connection: V-IN input, V-OUT output(terminals don’t need solder).
Module Name: 150W boost module
Module properties: non-isolated module
Minimum voltage difference: 0V
Two Input voltage optional: select the input voltage by adjusting the jumper on the back of the PCB
Input/output Voltage 1: When Input DC 10-32V £¨aimed at application to wide input voltage)
Input/output Voltage 2: When Input DC 8-16V (aimed at application to 3 strings of lithium battery and 12V accumulator)
Output Voltage 1 : When Input DC 10-32V,Output 10-46V((adjustable, default 19V)
Output Voltage 2 : When Input DC 8-16V,Output 8-46V(adjustable, default 19V)
Input Current: 16A Max. (exceed 8A please enhance heat dissipation)
Output current: 8A Max. (exceed 4A please enhance heat dissipation)
Quiescent operating current: 15mA (12V to 20V, higher output voltage will increase the quiescent current)
Output power: 90W(natural cooling), 150W(enhance heat dissipation)
Capacitances:2x 470uF/35V(input) ; 2x 330uF/50V(output)
Operating temperature: -40¡ãc to +85¡ãc
Working frequency: 380KHz
Conversion efficiency: up to 95%
Operating indicator: Yes
Short circuit protection: None
Input reverse polarity protection: None (If need please install diode at input port)
Installation: 4x 3mm screws
Wiring: Terminals, Needn’t solder, V-IN input, V-OUT output
Module size: 60mm x 50mm x 20mm
16V to 19V, output current 3A, efficiency 94%
12V to 20V, output current 5A, efficiency 89.5%
12V to 30V, output current 3A, efficiency 89.2%
24V to 42V, output current 3A, efficiency 95.2%
DIY a voltage Regulator, adjustable.
The power supply for electronic equipment.
Used as a car power supply, Power supply for laptop,PDA, or other digital products
DIY a notebook mobile power
1x DC Boost Converter
…. Read More ….
Buy with confidence from Amazon